Consulta de Guías Docentes



Academic Year/course: 2018/19

532 - Master's in Industrial Engineering

60806 - Factories and industrial facilities


Syllabus Information

Academic Year:
2018/19
Subject:
60806 - Factories and industrial facilities
Faculty / School:
110 - Escuela de Ingeniería y Arquitectura
Degree:
532 - Master's in Industrial Engineering
ECTS:
4.5
Year:
1
Semester:
532-First semester o Second semester
107-First semester
Subject Type:
Compulsory
Module:
---

1.1. Aims of the course

The aim of the course is learning general aspects relating to the design and management of industrial zones, focusing on the plant layout and organization of its related services, considering its spatial arrangement and functional operation. All this should meet the activity requirements, as well as current normative regulations.

 

For this, the competencies and responsibilities of the industrial engineer in this subject are defined, as well as the certifications, verifications and project management documents required for the industrial plants. The urban planning parameters that influence the layout of industrial plants are described, and the most representative types of industrial zones (detailing its main characteristics and design criteria).

It delves into the parameters to consider for the plant layout, providing the necessary tools for its heuristic and scientific design based on functional and productive criteria.In addition, the normative regulations to be considered for the plant construction are presented. The course ends with the study of supplementary facilities for the industrial activity, by analysing its integration into industrial zones.

1.2. Context and importance of this course in the degree

The obligatory module of the "Máster en Ingeniería Industrial" consists on several courses with a total of 60 ECTS, which aim to provide the skills associated with the industrial engineer practice. Within this obligatory module, the course "Plantas y Servicios Industriales", has 4.5 ECTS and represents one of the twelve courses to be taken.

 

This course, with the course "Construcciones Industriales y Teoría de Estructuras" also obligatory and imparted in the next four months, is the only possibility within the module to learn the design and arrangement of industrial zones, the implementation of industrial activities, and the integration of its normative requirements.

 

The course is designed as a complement to the skills associated with the course "Construcciones Industriales y Teoría de Estructuras", focusing its content to the field of design, planning and implementation of industrial plants and related services. The course approach is eminently practical and oriented to the professional practice.

1.3. Recommendations to take this course

This subject has no prerequisites.

2.1. Competences

  • Design, construction and management of industrial plants.

  • Use of specific and integrated knowledge for the construction of industrial buildings and application of planning and construction regulations.

  • Design and integration of these installations in industrial plants.

  • Check and control the construction works and the facilities operation.

  • Perform certifications, tests and reports related to the industrial construction activity.

2.2. Learning goals

  1. Knowledge of urban parameters and its planning characteristics and development.

  2. Knowledge of different types of industrial zones and ability to integrate the industrial plant in them.

  3. Ability to design and manage industrial plants adapted to different factory processes.

  4. Knowledge and ability to design and integrate into the industrial plant and into the urban infrastructure, the services and facilities required for the industrial activity.

  5. Knowledge and ability to perform the verification and control of facilities and infrastructures of an industrial plant.

  6. Knowledge and ability to perform certifications, audits, verifications, tests and reports in the above subjects.

2.3. Importance of learning goals

The professional who has completed the "Máster de Ingeniería Industrial" must have a versatile and general training to resolve the challenges of the professional practice. Within this professional practice, the building sector has a significant weight. Therefore, it is necessary to provide a general knowledge related to industrial buildings, enabling the proper performance of their duties.

 

This course presents contents that analyze the plant layout and arrangement of industrial zones (including its complementary services), with emphasis on the plant construction within the plot. It delves into the Spanish normative regulations and knowledge are provided for certifications, audits, verifications testing and management reports related to the project and construction of industrial plants.

3.1. Assessment tasks (description of tasks, marking system and assessment criteria)

The student will be assessed by a single test at the end of the course, consisting of a theoretical and practical exam to be performed on the date established by the academic calendar of the EINA. 50% of this exam corresponds to theoretical subjects, while the remaining 50% will refer to practical exercises.

4.1. Methodological overview

The methodology followed in this course is oriented towards achievement of the learning objectives. It promotes continuous work and focuses on the key aspects of industrial plants. A wide range of teaching and learning tasks are implemented, such as lectures, practice sessions, case studies, and tutorials.

Students are expected to participate actively in the class throughout the semester. 

Classroom materials will be available via Moodle. These include a repository of the lecture notes used in class, the course syllabus, as well as other course-specific learning materials. 

4.2. Learning tasks

The course includes the following learning tasks:

  • Lectures. Presentation of the main theoretical contents illustrated with examples.
  • Laboratory practice sessions. Knowledge application coordinated with the lecture contents and supervised by teachers of the course. These sessions take place in smaller groups to enhance student learning, and develop various technical case studies.
  • Tutorials. Teacher's office hours for students to review both the acquisition of theoretical knowledge and their practical assignments.

4.3. Syllabus

The course will address the following topics:

  1. Industrial architecture.
  2. Competences and responsibilities of the industrial engineer.
  3. Endorsements, licenses and normative requirements applicable to the design and construction of industrial plants.
  4. Planning regulations and urban management in industrial zones.
  5. Arrangement of industrial zones.
  6. Plant layout.
  7. Integration of services and facilities in industrial zones and buildings.

4.4. Course planning and calendar

Further information concerning the timetable, classroom, office hours, assessment dates and other details regarding this course, will be provided on the first day of class or please refer to the EINA website and the Moodle platform.

 

The student must check the dates for conducting the practices. It shall be informed of these dates at the beginning of the course and by the Anillo Digital Docente application.

 

The exams will be held on the dates established by the EINA.


Curso Académico: 2018/19

532 - Máster Universitario en Ingeniería Industrial

60806 - Plantas y servicios industriales


Información del Plan Docente

Año académico:
2018/19
Asignatura:
60806 - Plantas y servicios industriales
Centro académico:
110 - Escuela de Ingeniería y Arquitectura
Titulación:
532 - Máster Universitario en Ingeniería Industrial
Créditos:
4.5
Curso:
1
Periodo de impartición:
532-Primer semestre o Segundo semestre
107-Primer semestre
Clase de asignatura:
Obligatoria
Módulo:
---

1.1. Objetivos de la asignatura

 

El objetivo de la asignatura es el aprendizaje de aspectos generales relativos al diseño y ordenación de áreas industriales, incidiendo en el proceso de implantación industrial y la organización de sus servicios complementarios, tanto en lo referido a su disposición espacial como en su adecuación funcional. Todo ello debe ajustarse a las necesidades de la empresa, así como a la normativa vigente de obligado cumplimiento.

 

Para ello, se definen las competencias y atribuciones del ingeniero industrial en la materia, así como las certificaciones, verificaciones y documentos relacionados con la gestión del proyecto y la obra de plantas industriales. Se describen los parámetros urbanísticos que condicionan la ordenación de áreas industriales y se presentan los tipos más representativos de áreas industriales, desglosando sus principales características y criterios de diseño.

 

Se profundiza en los parámetros a considerar para el proceso de implantación industrial, proporcionando las herramientas necesarias para su diseño heurístico y científico basado en criterios funcionales y productivos. Igualmente se presentan los aspectos normativos vigentes que han de ser considerados para la construcción de edificios y servicios complementarios en la parcela industrial. La asignatura culmina con el estudio de los diversos servicios complementarios a la actividad industrial, atendiendo a su integración en los ámbitos industriales.  

1.2. Contexto y sentido de la asignatura en la titulación

El módulo de formación obligatoria del Máster de Ingeniería Industrial se compone de varias asignaturas hasta un total de 60 créditos ECTS, que pretenden dotar al alumno de las competencias vinculadas a la formación generalista asociada al ingeniero industrial.

 

Dentro de este módulo de formación obligatoria, la asignatura de “Plantas y Servicios Industriales”, dotada con un total de 4,5 créditos ECTS, representa una de las doce asignaturas a cursar.

 

La asignatura, junto con la asignatura “Construcciones industriales y teoría de estructuras”, también obligatoria e impartida en el siguiente cuatrimestre, constituye la única posibilidad dentro del módulo de formación obligatoria de familiarizarse con el diseño y ordenación de áreas industriales y con la implantación de edificios industriales y de sus servicios complementarios, integrando los requisitos normativos exigidos.

 

Con ello, la asignatura se plantea como un complemento autocontenido para las competencias asociadas a la asignatura “Construcciones industriales y teoría de estructuras”, enfocando su contenido al campo del diseño, ordenación e implantación de las plantas industriales y sus servicios complementarios. El enfoque de la asignatura es eminentemente práctico y orientado al futuro profesional del egresado.

1.3. Recomendaciones para cursar la asignatura

Esta asignatura no tiene prerrequisitos.

2.1. Competencias

Diseñar, construir y explotar plantas industriales.   

Utilizar conocimientos específicos e integrados para la construcción de naves industriales y la aplicación de la normativa urbanística y edificatoria.

Proyectar, diseñar e integrar las instalaciones presentes en los edificios industriales.

Verificar y controlar procesos constructivos, así como el funcionamiento de instalaciones.

Realizar certificaciones, ensayos e informes relacionados con la actividad constructiva industrial.

2.2. Resultados de aprendizaje

El estudiante, para superar esta asignatura, deberá demostrar los siguientes resultados...

Conocimientos de los parámetros urbanísticos del suelo y sus características de planeamiento y desarrollo.

Conocimientos de las diferentes tipologías de áreas industriales y capacidad para integrar la planta industrial en ellas.

Capacidad para diseñar y explotar plantas y construcciones complementarias adaptadas a diferentes procesos industriales.

Conocimientos y capacidad para diseñar, proyectar e integrar en la planta industrial y en la infraestructura urbana, los servicios e instalaciones necesarios para la actividad industrial.

Conocimientos y capacidad para realizar la verificación y el control de las instalaciones e infraestructuras de una planta industrial.

Conocimientos y capacidad para realizar certificaciones, auditorias, verificaciones, ensayos e informes en los ámbitos anteriores.

2.3. Importancia de los resultados de aprendizaje

El profesional que haya cursado el Máster de Ingeniería Industrial debe contar con una formación polivalente y generalista, con capacidad para resolver y afrontar los retos que se le planteen en su ejercicio profesional. Dentro de este ejercicio profesional, el sector de la edificación industrial cuenta con un importante peso específico. Es por ello necesario dotar al estudiante de conocimientos generales vinculados a las edificaciones industriales, que permitan el correcto desempeño de sus funciones.

 

Para ello, esta asignatura presenta un compendio de contenidos que abordan el proceso de ordenación funcional de los espacios en ámbitos industriales y la integración de sus servicios complementarios, haciendo hincapié en el proceso de implantación dentro de la parcela y el edificio industrial.Se profundiza en la aplicación de la normativa de obligado cumplimiento en España y se proporcionan los conocimientos necesarios para realizar certificaciones, auditorias, verificaciones, ensayos e informes relacionados con la gestión del proyecto y la obra de plantas industriales.

3.1. Tipo de pruebas y su valor sobre la nota final y criterios de evaluación para cada prueba

 

El alumno será evaluado mediante una única prueba global al final del curso, consistente en un examen teórico-práctico a realizar en la fecha indicada por el calendario académico de la Escuela de Ingeniería y Arquitectura. La nota del examen se reparte del siguiente modo:

-          50% correspondiente a cuestiones teóricas relacionadas con el contenido de la asignatura.

-          50% correspondiente a ejercicios prácticos.

4.1. Presentación metodológica general

 

La metodología aplicada trata de potenciar el trabajo continuado del estudiante y se centra en los aspectos más fundamentales del diseño edificatorio industrial. Para ello se desarrollarán diversas metodologías docentes:

 

-          Adquisición de conocimientos teóricos mediante clase magistral participativa, impartida al grupo completo en las horas de docencia asignadas semanalmente.

-          Aplicación de los conocimientos mediante clases prácticas coordinadas con el avance teórico de la asignatura y supervisadas por el profesorado de la asignatura. Estas sesiones se desarrollan en grupos más reducidos para potenciar el aprendizaje práctico del alumno y el desarrollo de diversos estudios de caso técnicos.

-          Las tutorías servirán para revisar tanto la adquisición de conocimientos teóricos por parte del alumno, así como el trabajo autónomo realizado por el mismo.

 

Para seguir las sesiones teóricas y prácticas, el alumno dispondrá del material docente elaborado por el profesorado de la asignatura.

4.2. Actividades de aprendizaje

 

Programa de la asignatura

  • Arquitectura industrial
  • Competencias y atribuciones del ingeniero industrial. Ley de Ordenación de la Edificación.
  • Visados, licencias y legislación aplicable para el proyecto y la obra de plantas industriales.
  • Legislación, planeamiento y gestión urbanística en el ámbito industrial.
  • Ordenación de áreas industriales.
  • Implantación industrial.
  • Integración de servicios e instalaciones en áreas y edificios industriales.

4.3. Programa

  • Arquitectura industrial
  • Competencias y atribuciones del ingeniero industrial. Ley de Ordenación de la Edificación.
  • Visados, licencias y legislación aplicable para el proyecto y la obra de plantas industriales.
  • Legislación, planeamiento y gestión urbanística en el ámbito industrial.
  • Ordenación de áreas industriales.
  • Implantación industrial.
  • Integración de servicios e instalaciones en áreas y edificios industriales.

4.4. Planificación de las actividades de aprendizaje y calendario de fechas clave

 

La impartición teórica de la asignatura se desarrollará mediante clases magistrales. La docencia teórica se complementará con prácticas de laboratorio presenciales, distribuidas a lo largo del curso de acuerdo al calendario de prácticas dispuesto por la EINA y según lo indicado al inicio de la asignatura. Todas estas actividades contarán con apoyo a través de la plataforma Moodle, utilizando el Anillo Digital Docente de la Universidad de Zaragoza.

 

Las fechas fijadas para la realización de las prácticas se comunicarán al alumno al inicio del curso y mediante la plataforma Moodle de la asignatura, atendiendo al calendario académico del centro correspondiente a cada curso. El examen correspondiente a la evaluación global se realizará en la fecha indicada en el calendario académico de la Escuela de Ingeniería y Arquitectura.

 

El estudiante debe estar atento a las fechas indicadas para la realización de las prácticas durante el transcurso de la asignatura. Será informado de estas fechas tanto al inicio del curso como a través del Anillo Digital Docente.

 

Los exámenes de la asignatura se realizarán en las fechas establecidas por la Escuela de Ingeniería y Arquitectura a tal efecto.